RipOne + MRS-450M/610M

Optimizing Movable Rip Saw with 3D Image Scanning System

Main Features

  • Choice of 1-4 movable blades

  • Extra large 450mm cutting width

  • Optimizing cut function

Available Models

  • MRS-450M 50HP Motor

  • MRS-450M 60HP Motor

  • CE Model

Available Options

  • Laser Unit 15mw

  • MRS Replaceable Chain Block and Pads

  • MRS 12" Short Stock Device

  • 3m Auto MRS Infeed Table

  • 4m Auto MRS Infeed Table

Features of Rip-One System

  • Ultra High Resolution Lens: Equipped with top and bottom 2 Megapixel color high Def Camera, which can capture data at 100 frames per second.

  • Max. Productivity: Processing 7〜9 pieces of 3m long board per minute.

  • 3D Board Profiling: Using the exclusive technology to capture 3D contour of each piece of wood, including thickness, defective side, bark, wood knot and crack.

  • Automatic Fence Skew Function: It allows for cutting a bent or Irregular side of wood to increase 2〜3% of yield.

  • The world's highest cost to performance ratio of movable rip saw with image scanning system。The machine price is only one half or one-third of European competitive models.

  • The scanner is easy to install, calibrate, maintain and conduct trouble shooting,that dramatically upgrades machine utilization percentage and defect-free rate of product, Featuring long service life and without use of expensive LED lamp.

  • Designed with over 20 years of experience in operation software interface, the programs of RIP ONE are stable and easy to operate。Even an inexperienced person can get started quickly。The system can be connected to users for remote processing, diagnosis and correction for machine problem.

  • It can save material by 8〜10% compared to manual material preparation, and 3〜5% Compared to a conventional optimization system.


  • This system includes an automatic forced mechanical lubricator (right) for feed chain and a manual central lubricator (left) for movable saw mechanism.

  • The mechanical lubricator ensures proper lubrication for the caterpillar chain and rail. Lubricant flow is automatically varied with the feed speed of caterpillar chain. If the oil runs out, an alarm lamp lights up.

  • The manual central lubricator provides proper lubricant to the ball screws which ensure that all movable saws operate smoothly.


  • Hardened steel anti-kickback finger system (2 upper rows and 1 bottom row) are engineered for greater operator safety. One row of anti-backward fingers is positioned in front of first roller to prevent the wood from being pushed back during cutting.

  • A specially designed roller, located in front of the first steel anti-kickback fingers, ensures a smoother feeding.


  • The complete feed rollers are air-loaded to ensure outstanding stability during cutting and smooth feeding effect.

  • Pressure for each feed roller can be individually adjusted from the centralized pressure regulators.

  • Pressure for each feed roller is indicated by individual pressure gauge.


  • The movable sawblade units can be installed with a short-stock cutting device for cutting short or thin workpieces with greater ease and safety.

Four (4) movable and two (2) fixed blade configuration


  • Maximum stability of saw arbor is achieved through the firm support at end.


  • Ultrathin patented saw blade (2.2~2.6 mm) is able to do panel joint ripping.

  • Max. ripping speed reaches 60m/min.

ADDRESS / No.283, Sec. 2, Fengshi Rd., Fengyuan Dist., Taichung City 42081, Taiwan.

PHONE / +886-4-25226151

FAX / +886-4-25243251

Copyright © 2017 Kuang Yung Machinery Co., Ltd. | design by megaweb